JANSEN® HS-20H110E Log Splitter – 20 metric tons of splitting force, 110 cm & 400V
The JANSEN® HS-20H110E is a powerful electric log splitter with 20 metric tons of measured splitting force and a maximum splitting length of 110 cm. A special feature is the hydraulic lifting mechanism: An additional hydraulic cylinder allows the machine to be easily raised or lowered and moved into the transport position.
The hydraulic pump is driven by a 400V electric motor with 2.2 kW. The cylinder has a piston stroke of 100 cm, while the 30 cm-long splitting wedge can be guided deep into the wood to be split.
Important: The JANSEN® HS-20H110E is intended exclusively for vertical splitting operation. The horizontal position is for handling or transport—the log splitter must not be operated in the horizontal position.
Key Benefits
- 20 metric tons of measured splitting force
- Maximum splitting length of 110 cm
- 400 V electric motor with 2.2 kW
- Hydraulic raising and lowering of the machine
- Additional hydraulic cylinder for working and transport positions
- Cylinder piston stroke of 100 cm
- 30 cm long splitting wedge
- Controls located directly on the cylinder
- Permanently mounted metal lines instead of multiple flexible hoses
- Ball-bearing wheels
- The splitting wedge can be locked in various positions
- The splitting wedge can move forward and backward from its current position
Hydraulic raising & lowering
A special feature of the HS-20H110E is the hydraulic raising and lowering. An additional hydraulic cylinder allows the machine to be raised from the transport position to the upright working position and then lowered again.
Especially given the machine’s weight of approximately 340 kg without fluids, this feature significantly simplifies handling of the log splitter.
Please note: The hydraulic lowering function is not intended for operating the log splitter while it is lying down. Splitting operations are intended exclusively for the upright position.
20 metric tons of splitting force – measured directly at the splitting wedge
The JANSEN® HS-20H110E achieves a splitting force of 20 metric tons. The splitting force is measured directly at the splitting wedge and thus indicates the actual force applied there.
The maximum splitting length is 110 cm. This is the actual maximum length of the piece of wood to be processed.
100 cm cylinder stroke & 30 cm splitting wedge
The cylinder of the HS-20H110E has a piston stroke of 100 cm. This allows the 30 cm long splitting wedge to be driven deep into the wood.
The long splitting wedge is particularly helpful when splitting thicker logs, as the wood is forced apart over a correspondingly long distance.
The hydraulic system is also designed so that the splitting wedge can be stopped in various positions. It can then be moved either forward or backward as desired. A full return to the starting position is therefore not required after every splitting operation.
400V electric motor with 2.2 kW
The hydraulic pump is driven by a 400V electric motor with 2.2 kW. The coordination of the electric motor and hydraulic pump provides the power required for the splitting process.
The electric drive requires no fuel and produces no local exhaust emissions during operation. A suitable 400V power connection is required for operation.
Enhanced Operation & Design
As part of ongoing product development, the HS-20H110E has been redesigned in several areas. In the current version, the controls are located directly on the cylinder, making them more accessible when the machine is in a stationary position.
In addition, many flexible hydraulic hoses have been replaced by permanently mounted metal lines. The wheels on the current model are ball-bearing mounted, enabling smoother operation when moving the machine.
Transport & Maneuvering
The HS-20H110E features a drawbar and hitch, allowing it to be moved and maneuvered at the job site. The hydraulic lowering mechanism allows the machine to be lowered to a significantly lower position for transport.
In the lowered position, the maximum dimensions are approximately 310 x 119 x 122 cm. In the upright working position, the log splitter reaches a maximum height of approximately 270 cm.
Please note: The log splitter is not approved for road use and therefore must not be towed behind a passenger car on public roads in Germany. For transport on public roads, the unit must be loaded onto a suitable trailer, for example.
Technical Specifications
- Model: JANSEN® HS-20H110E
- Operating position: upright only
- Splitting force: 20 metric tons (measured value)
- Max. splitting length: 110 cm
- Drive: Electric motor
- Voltage: 400 V
- Motor power: 2.2 kW
- Cylinder piston stroke: 100 cm
- Cylinder downward stroke: approx. 12 seconds
- Cylinder upward stroke: approx. 11 seconds
- Splitting wedge length: 30 cm
- Hydraulic raising and lowering: yes
- Operation: directly on the cylinder
- Wheels: ball-bearing mounted
- Weight without fluids: approx. 340 kg
- Dimensions (lowered / transport position): max. approx. 310 x 119 x 122 cm (L x W x H)
- Dimensions in upright working position: max. approx. 310 x 119 x 270 cm (L x W x H)
- Hydraulic oil capacity: approx. 20 liters
- Recommended hydraulic oil: HLP46
- Packaging dimensions: approx. 213 x 53 x 82 cm (L x W x H)
- Weight including packaging: approx. 372 kg
Delivery & Commissioning
The JANSEN® HS-20H110E is delivered well-protected and partially disassembled in a wooden crate. Allow approximately 3–4 hours for final assembly.
Due to the weight of the individual components, assembly should be performed by at least two people. A German operating manual and exploded view diagrams are included in the scope of delivery.
Approximately 20 liters of hydraulic oil are additionally required for the initial fill. Hydraulic oil of the HLP46 classification is recommended.
Service & Replacement Parts
Even after your purchase, we are here to personally assist you with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We have many spare parts in stock.
Frequently Asked Questions (FAQ)
What is the splitting force of the JANSEN® HS-20H110E?
Answer: The log splitter achieves a measured splitting force of 20 metric tons. The measurement is taken directly at the splitting wedge.
What is the maximum log length that can be processed?
Answer: The HS-20H110E is designed for logs up to 110 cm in length.
Can the HS-20H110E be operated in a horizontal position?
Answer: No. The JANSEN® HS-20H110E is intended exclusively for vertical splitting operation. The lowered position is for handling and transport.
How is the log splitter raised?
Answer: The HS-20H110E features an additional hydraulic cylinder, which can be used to hydraulically raise the machine and return it to the lowered transport position.
What type of power connection does the log splitter require?
Answer: The built-in electric motor operates at 400 V and has a power output of 2.2 kW.
What is the cylinder stroke?
Answer: The cylinder piston stroke is 100 cm.
How fast does the cylinder operate?
Answer: A complete downward cycle takes approx. 12 seconds, and the return stroke upward takes approx. 11 seconds.
How long is the splitting wedge?
Answer: The standard splitting wedge is 30 cm long.
Does the splitting wedge have to retract completely after every splitting operation?
Answer: No. The splitting wedge can be stopped in various positions and then moved either forward or backward as desired.
Is the HS-20H110E street-legal?
Answer: No. The log splitter is not approved for road use and must not be towed behind a passenger car on public roads in Germany.
What type of hydraulic oil is required?
Answer: Approximately 20 liters of hydraulic oil are required for the initial fill. We recommend hydraulic oil classified as HLP46.
How long does final assembly take?
Answer: You should plan on approximately 3–4 hours for final assembly. Due to the weight of the components, assembly should be performed by at least two people.
Options de livraison et d'assemblage :
Chez Ma Maisons, nous vous proposons trois options pour l'achat de machines et d'accessoires Jansen. La première consiste à acheter la machine ou la pièce démontée et à la récupérer en magasin. La deuxième option consiste à nous confier l'assemblage de la machine ou de l'accessoire et à le préparer pour votre retrait en magasin. La troisième option consiste à recevoir la machine ou la pièce démontée et à la livrer à l'adresse de votre choix. Lorsque l'article n'affiche que 2 options d'achat, cela signifie qu'aucun assemblage n'est requis. Si vous sélectionnez non assemblé et récupéré à La Meyze ou assemblé et récupéré à La Meyze, suivez les étapes de paiement et sélectionnez le retrait dans la section livraison.
Garanties :
Traitement des demandes de garantie Et si malgré tout quelque chose tourne mal ? Malgré nos normes de qualité élevées, il peut arriver, dans certains cas isolés, que nos produits présentent des défauts ou des carences imprévus. Mais n’ayez crainte, nous ne vous abandonnerons pas ! Les articles achetés chez nous bénéficient d'une garantie de 24 mois. En cas de défaut, nous vous aiderons aussi rapidement et facilement que possible. Procédez comme suit : Étape 1 : Contactez-nous Il nous est toujours utile de recevoir quelques photos illustrant le problème ! Veuillez également indiquer votre numéro de téléphone afin que nous puissions vous rappeler. Nous vous contacterons sous 24 heures (jours ouvrés) pour discuter de tous les détails. Selon l'ampleur du problème, l'une des deux procédures suivantes sera mise en œuvre : Étape 2 : Solution Cela sera réalisé par l'une des méthodes suivantes : Le problème est dû à une seule pièce défectueuse qui peut être facilement remplacée.Dans ce genre de situation, nous vous envoyons la pièce de rechange nécessaire par colis afin que vous puissiez la remplacer vous-même. Vous recevrez peut-être une étiquette de retour prépayée pour nous renvoyer la pièce défectueuse.Nous vous préciserons bien sûr au préalable si le remplacement de la pièce par vos soins est une option envisageable. Le défaut concerne le produit dans son ensemble et ne peut être résolu par le simple remplacement d'une pièce.Dans ce cas extrêmement improbable, nous organiserons l'enlèvement du produit par un transporteur, la réparation du défaut dans notre atelier spécialisé et le retour du produit après test, ou nous vous enverrons un nouveau produit de remplacement par transporteur.Dans ce cas, vous devrez fixer le produit sur une palette pour le transport par le transporteur. Veuillez noter que nous ne pouvons pas prendre en charge les coûts liés aux temps d'arrêt ni les frais de location d'équipement tiers !