JANSEN® RD-800pro Tracked Dump Truck – 1,000 kg Payload & Hydraulic High-Tipping System
The JANSEN® RD-800pro expands the RD-800’s range of applications with a hydraulic high-tipping system. In addition to the hydraulically forward-tilting bed, the entire load bed can be raised hydraulically. This allows transported material to be unloaded directly into suitable receiving containers, trailers, or other higher-level areas from a greater height.
On level ground, the maximum payload is up to 1,000 kg. Power is provided by a powerful LonCin single-cylinder, 4-stroke, OHV gasoline engine with 15 PS and a displacement of 389 cm³. The gear transmission offers a total of 6 forward and 2 reverse gears.
Another advantage is the versatile transport bed: The side panels can be folded down or completely removed. This allows the RD-800pro to also be used as a transport platform and makes it suitable not only for bulk materials but also for transporting pallets and bulky cargo.
Key advantages
- Maximum payload of 1,000 kg on level ground
- Hydraulic high-tipping system
- Hydraulically forward-tilting bed
- Hydraulically height-adjustable loading bed
- Tipping height up to approx. 1,200 mm with the tailgate open
- LonCin single-cylinder 4-stroke OHV gasoline engine with 15 PS and 389 cm³ displacement
- 6 forward and 2 reverse gears
- Robust rubber-track undercarriage with track tensioner
- Steering via steering brakes
- Automatic safety brake
- Foldable and fully removable side panels
- Can be used as a transport platform
- Suitable for transporting compatible pallets
- Foldable step
- Ground clearance of approx. 145 mm
Hydraulic high-tilt system
The key feature of the JANSEN® RD-800pro is the hydraulic high-tilt system. The cargo bed can be raised hydraulically and then tilted forward.
This allows the transported material to be unloaded at a greater height. When retracted, the front edge of the loading bed is at a height of approx. 1070 mm and can be raised to approx. 1810 mm when extended.
The specified tipping height with the flap closed is approximately 1080 mm. With the flap open, the height reaches approximately 1200 mm.
The high-tipping system thus expands the range of applications compared to a conventional crawler dumper and enables, for example, unloading into suitable containers, trailers, or other elevated destinations.
Up to 1000 kg payload
On level ground, the JANSEN® RD-800pro can be loaded with up to 1000 kg. As the gradient increases, the maximum payload decreases accordingly.
- Flat ground: up to 1000 kg
- At a 17% or approx. 10° incline: up to 650 kg
- At a 30% or approx. 17° incline: up to 425 kg
The load should always be adjusted to the respective terrain and gradient conditions.
Hydraulic Tipping Bed
In addition to hydraulic height adjustment, the RD-800pro features a hydraulically forward-tipping bed. This allows for the convenient unloading of suitable bulk materials.
The combination of hydraulic height adjustment and the tipping function makes it possible to first raise the material to the desired unloading height and then tip it out hydraulically.
This expands the range of applications, particularly for tasks where sand, soil, gravel, stones, or other suitable bulk materials are not only transported but also subsequently unloaded at an elevated position.
Foldable & Removable Side Walls
The JANSEN® RD-800pro’s transport bed is equipped with foldable side walls. These can also be completely removed if necessary.
This allows the machine to be used not only as a classic tracked dumper with a closed body, but also as a transport platform. This expands its range of applications, particularly when transporting larger or bulky items.
The exterior dimensions of the enclosed bed are approximately 1390 x 880 x 300 mm. When the side panels are removed, a flat bed measuring approximately 1320 x 820 mm is available.
Space for Pallets & Freight
The enclosed bed has interior dimensions of approximately 1315 x 815 x 300 mm, providing space for pallets and freight within the specified dimensions.
In combination with the foldable and fully removable side panels, the RD-800pro can thus be used for both bulk materials and various unit loads and cargo.
6 forward and 2 reverse gears
The RD-800pro’s gear transmission features a total of 6 forward gears and 2 reverse gears. This allows the driving style to be adapted to different work and terrain conditions.
Steering is controlled via steering brakes. By applying the brakes to the respective side of the track, the machine can be maneuvered accordingly. In addition, the crawler dumper features an automatic safety brake.
LonCin 1-cylinder 4-stroke OHV gasoline engine
Power is provided by a LonCin 1-cylinder 4-stroke OHV gasoline engine with 15 PS and a displacement of 389 cm³.
The fuel used is unleaded gasoline. The fuel tank holds approximately 4.5 liters. The engine is started using a recoil starter.
Caterpillar track system for various terrains
The robust rubber-track system with a track tensioner enhances traction on various terrains and allows the RD-800pro to be used even in rough terrain.
The ground clearance is approximately 145 mm. When fully assembled, the machine has dimensions of approximately 2300 x 900 x 1250 mm.
Foldable footboard
The JANSEN® RD-800pro features a folding step. This enhances operator comfort, especially during longer trips.
When the step is not needed, it can be folded away.
Typical Applications
Thanks to its combination of high payload capacity, tracked undercarriage, hydraulic tipper body, high-tipping system, and removable side walls, the JANSEN® RD-800pro is suitable for a variety of transport and unloading tasks.
- Gardening and landscaping
- Forestry
- Construction sites
- Farm work
- Renovation and restoration work
- Transport of sand, soil, gravel, and other suitable bulk materials
- Transport of pallets and bulky items
- Unloading into suitable containers and trailers
- Transport and unloading operations on rough terrain
Technical Specifications
- Model: JANSEN® RD-800pro
- Machine type: Tracked dumper / chain dumper with high-tipping system
- Engine: LonCin 1-cylinder 4-stroke OHV gasoline engine with 15 PS and 389 cm³ displacement
- Fuel: unleaded gasoline
- Fuel tank capacity: approx. 4.5 liters
- Starting system: Recoil starter
- Drivetrain: Gear transmission
- Gears: 6 forward / 2 reverse
- Steering: Steering brake
- Brakes: automatic safety brake
- Hydraulics: tipping hydraulics, tips forward
- High-tipping system: hydraulically height-adjustable
- Hydraulic oil capacity: approx. 3–3.5 liters
- Engine oil capacity: approx. 1 liter
- Max. payload on level ground: 1000 kg
- Payload at 17% / approx. 10° grade: 650 kg
- Payload on a 30% / approx. 17° incline: 425 kg
- Ground clearance: approx. 145 mm
- Interior dimensions of closed bed: approx. 1315 x 815 x 300 mm (L x W x H)
- External dimensions of closed cargo bed: approx. 1390 x 880 x 300 mm (L x W x H)
- Flat cargo bed without side panels: approx. 1320 x 820 mm
- Height of front edge of closed cargo bed: approx. 1070 mm from the ground
- Height of front edge of open cargo bed: approx. 760 mm from the ground
- Height of front edge of retracted cargo bed: approx. 1070 mm
- Height of front edge of loading bed when extended: approx. 1810 mm
- Tipping height with tailgate closed: approx. 1080 mm
- Tipping height with tailgate open: approx. 1200 mm
- Side panels: foldable and completely removable
- Step: included, foldable
- Dimensions when assembled: approx. 2300 x 900 x 1250 mm (L x W x H)
- Weight: approx. 545 kg
- Packaging dimensions: approx. 230 x 990 x 142 cm (L x W x H)
- Shipping weight: approx. 559 kg
Delivery & Commissioning
The JANSEN® RD-800pro is delivered well-protected in a sturdy steel frame. You should allow approximately 15 minutes for commissioning.
IMPORTANT: The hydraulic oil level must be checked before initial startup and topped off if necessary. The hydraulic system requires approximately 3 to 3.5 liters of hydraulic oil.
Similarly, the engine oil level must be checked before initial operation and topped off if necessary. The required amount of engine oil is approximately 1 liter.
If you have any questions about startup, we’re of course happy to assist you personally by phone.
Service, Replacement Parts & Showroom
Even after your purchase, we’re here to assist you personally with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We keep many spare parts in stock.
Our expert staff is also available to assist you with technical questions personally by phone.
Many of our machines are set up and ready for operation in our showroom. You are welcome to view and test the JANSEN® RD-800pro and other machines on-site by appointment.
Frequently Asked Questions (FAQ)
What is the difference between the JANSEN® RD-800 and the RD-800pro?
Answer: The main difference is the hydraulic high-tilt system of the RD-800pro. The loading hopper can be raised hydraulically and then tilted. This allows material to be unloaded at a greater height.
How high can the RD-800pro’s loading bed be raised?
Answer: The front edge of the loading bed is at a height of approx. 1070 mm when retracted and approx. 1810 mm when extended. The specified tipping height is approximately 1,080 mm with the tailgate closed and approximately 1,200 mm with the tailgate open.
What is the maximum payload of the JANSEN® RD-800pro?
Answer: On level ground, the maximum payload is 1000 kg. On a 17% grade (approx. 10°), the maximum payload is up to 650 kg, and on a 30% grade (approx. 17°), it is up to 425 kg.
Can the side panels be completely removed?
Answer: Yes. The side panels can be folded down and completely removed. This allows the RD-800pro to also be used as a transport platform.
What should be considered when putting the JANSEN® RD-800pro into service?
Answer: The RD-800pro is delivered in a sturdy steel frame. Allow approximately 15 minutes for setup. Before initial operation, the hydraulic oil level and engine oil level must be checked and topped off if necessary. The hydraulic system requires approximately 3 to 3.5 liters of hydraulic oil, and the engine requires approximately 1 liter of engine oil.
Options de livraison et d'assemblage :
Chez Ma Maisons, nous vous proposons trois options pour l'achat de machines et d'accessoires Jansen. La première consiste à acheter la machine ou la pièce démontée et à la récupérer en magasin. La deuxième option consiste à nous confier l'assemblage de la machine ou de l'accessoire et à le préparer pour votre retrait en magasin. La troisième option consiste à recevoir la machine ou la pièce démontée et à la livrer à l'adresse de votre choix. Lorsque l'article n'affiche que 2 options d'achat, cela signifie qu'aucun assemblage n'est requis. Si vous sélectionnez non assemblé et récupéré à La Meyze ou assemblé et récupéré à La Meyze, suivez les étapes de paiement et sélectionnez le retrait dans la section livraison.
Garanties :
Traitement des demandes de garantie Et si malgré tout quelque chose tourne mal ? Malgré nos normes de qualité élevées, il peut arriver, dans certains cas isolés, que nos produits présentent des défauts ou des carences imprévus. Mais n’ayez crainte, nous ne vous abandonnerons pas ! Les articles achetés chez nous bénéficient d'une garantie de 24 mois. En cas de défaut, nous vous aiderons aussi rapidement et facilement que possible. Procédez comme suit : Étape 1 : Contactez-nous Il nous est toujours utile de recevoir quelques photos illustrant le problème ! Veuillez également indiquer votre numéro de téléphone afin que nous puissions vous rappeler. Nous vous contacterons sous 24 heures (jours ouvrés) pour discuter de tous les détails. Selon l'ampleur du problème, l'une des deux procédures suivantes sera mise en œuvre : Étape 2 : Solution Cela sera réalisé par l'une des méthodes suivantes : Le problème est dû à une seule pièce défectueuse qui peut être facilement remplacée.Dans ce genre de situation, nous vous envoyons la pièce de rechange nécessaire par colis afin que vous puissiez la remplacer vous-même. Vous recevrez peut-être une étiquette de retour prépayée pour nous renvoyer la pièce défectueuse.Nous vous préciserons bien sûr au préalable si le remplacement de la pièce par vos soins est une option envisageable. Le défaut concerne le produit dans son ensemble et ne peut être résolu par le simple remplacement d'une pièce.Dans ce cas extrêmement improbable, nous organiserons l'enlèvement du produit par un transporteur, la réparation du défaut dans notre atelier spécialisé et le retour du produit après test, ou nous vous enverrons un nouveau produit de remplacement par transporteur.Dans ce cas, vous devrez fixer le produit sur une palette pour le transport par le transporteur. Veuillez noter que nous ne pouvons pas prendre en charge les coûts liés aux temps d'arrêt ni les frais de location d'équipement tiers !