JANSEN® RD-600 Tracked Dump Truck – 600 kg Payload & Hydrostatic Drive
The JANSEN® RD-600 is a self-propelled crawler dumper with hydrostatic drive and a maximum payload of 600 kg on level terrain. The hydrostatic drive system allows for stepless adjustment of travel speed, thereby facilitating controlled operation during a variety of transport tasks.
Power is provided by a Vanguard® 4-stroke gasoline engine from Briggs & Stratton with 14 PS / 10.4 kW. The engine features an integrated cyclone air filter and can be started conveniently either via an electric starter or a pull-start cord.
The tracked undercarriage enhances traction on various surfaces. Combined with the hydraulically tilting dump bed, a stable operator platform, and the machine’s compact width of approximately 81 cm, the RD-600 is designed for a variety of transport tasks involving sand, soil, gravel, stones, and other suitable materials.
Key Benefits
- Maximum payload of 600 kg on level ground
- Hydrostatic drive
- Continuously variable travel speed control
- Vanguard® 4-stroke gasoline engine by Briggs & Stratton
- Engine power: 14 PS / 10.4 kW
- Integrated cyclone air filter
- Electric starter and auxiliary recoil starter
- Self-propelled tracked dumper with chain drive
- Hydraulically tilting bucket
- Bucket tilt angle of more than 90°
- Reinforced bucket with 3 mm wall thickness
- Sturdy operator platform for riding along
- Ground clearance of approx. 145 mm at the front and 170 mm at the rear
- Compact machine width of approx. 810 mm
Hydrostatic drive
The JANSEN® RD-600 features a hydrostatic drive system. Unlike a conventional manual transmission, the hydrostat allows for stepless regulation of travel speed.
This allows the speed to be adjusted to the specific work situation and the nature of the ground. The system also enables starting from a standstill under load and is characterized by direct power transmission and low maintenance requirements.
Key features of the hydrostatic drive include:
- Stepless speed control
- Linear drive movement
- High torque
- Fast-acting overload protection
- Low mechanical wear
- Capable of starting from a standstill under load
- Low-maintenance design
Up to 600 kg payload
On level ground, the JANSEN® RD-600 can be loaded with up to 600 kg. As the incline increases, the maximum payload decreases accordingly.
- Flat terrain: up to 600 kg payload
- 17% or approx. 10° incline: up to 450 kg payload
- 30% or approx. 17° incline: up to 375 kg payload
The load should always be adjusted to the respective terrain and gradient conditions.
Hydraulic tipping bed with a tipping angle of more than 90°
The RD-600 is equipped with a hydraulically tipping bed. The hydraulic system raises and lowers the body, facilitating convenient unloading of the transported material.
The tilt angle is more than 90°. This allows the body to be tilted far back, which is particularly advantageous when unloading bulk materials.
The reinforced bed has a wall thickness of 3 mm. Its dimensions are approximately 1,330 x 620 x 680 mm (L x W x H).
14 PS Vanguard® engine from Briggs & Stratton
Power is provided by a Vanguard® 4-stroke gasoline engine from Briggs & Stratton with an output of 14 PS or 10.4 kW.
The engine runs on regular gasoline and features both an electric starter and an additional recoil starter. The fuel tank has a capacity of 6.6 liters.
The engine is also equipped with an integrated cyclone air filter.
Crawler Undercarriage for Various Terrains
The crawler undercarriage enhances the RD-600’s traction and stability on various terrains. As a result, the crawler dumper is designed for transport tasks on uneven, muddy, or sloped surfaces, for example.
The ground clearance is approximately 145 mm at the front and 170 mm at the rear. With a machine width of only approximately 810 mm, the tracked dumper remains compact despite its payload of up to 600 kg.
Sturdy operator platform
The JANSEN® RD-600 is equipped with a sturdy operator platform. It allows the operator to ride on the machine while it is in motion and to control the tracked dumper from the operator’s station.
For a Variety of Transport Tasks
The JANSEN® RD-600 combines a tracked undercarriage, hydrostatic drive, and a hydraulic tipping dump body, making it suitable for a variety of transport tasks.
Suitable materials include, for example:
- Sand
- Soil
- Gravel
- Rocks
- Construction materials
- Other suitable bulk and transport materials
Technical Specifications
- Model: JANSEN® RD-600
- Equipment type: self-propelled tracked dumper / crawler dumper
- Engine: Vanguard® (Briggs & Stratton) 4-stroke gasoline engine
- Engine power: 14 PS / 10.4 kW
- Air filter: integrated cyclone air filter
- Fuel: Regular gasoline
- Fuel tank capacity: 6.6 liters
- Starter: Electric starter and recoil starter
- Drive system: hydrostatic
- Body drive: hydraulic
- Body tilt angle: more than 90°
- Body wall thickness: 3 mm
- Max. payload on level ground: 600 kg
- Payload on a 17% / approx. 10° incline: up to 450 kg
- Payload on a 30% / approx. 17° incline: up to 375 kg
- Cargo bed dimensions: approx. 1,330 x 620 x 680 mm (L x W x H)
- Front ground clearance: approx. 145 mm
- Rear ground clearance: approx. 170 mm
- Height of front edge of cargo bed: approx. 670 mm from the ground
- Driver’s platform: included
- Dimensions when assembled: approx. 1,810 x 810 x 1,300 mm (L x W x H, max. top edge)
- Dry total weight: approx. 350 kg
- Packaging dimensions: approx. 181 x 81 x 145 cm (L x W x H)
- Weight including packaging: approx. 380 kg
Delivery & Commissioning
The unit is delivered well-packaged on a wooden pallet. You should allow approximately 30 minutes for commissioning.
IMPORTANT: The hydraulic oil level must be checked before initial startup and topped off with HLP-46 hydraulic oil if necessary. Likewise, the engine oil level must be checked before initial operation and topped off with 10W40 or 15W40 engine oil if necessary. The engine requires approximately 1 liter of engine oil. Unleaded gasoline is used as fuel.
Frequently Asked Questions (FAQ)
What is the payload capacity of the JANSEN® RD-600?
Answer: On level ground, the maximum payload is 600 kg. On a 17% grade (approx. 10°), the maximum payload is 450 kg, and on a 30% grade (approx. 17°), it is 375 kg.
What are the advantages of the hydrostatic drive?
Answer: The hydrostatic drive allows for stepless adjustment of the travel speed. Other features include direct power transmission, high torque, fast-acting overload protection, and relatively low maintenance requirements.
What engine is installed in the JANSEN® RD-600?
Answer: The RD-600 is equipped with a Vanguard® 4-stroke gasoline engine from Briggs & Stratton with 14 PS or 10.4 kW. The engine features an integrated cyclone air filter as well as electric and recoil starters.
How large is the loading bed?
Answer: The loading bed measures approximately 1,330 x 620 x 680 mm (L x W x H). It has a wall thickness of 3 mm and can be tilted hydraulically by more than 90°.
What should be considered during initial startup?
Answer: Allow approximately 30 minutes for startup. Before initial operation, the hydraulic oil level and the engine oil level must be checked and topped off if necessary. HLP-46 is specified for the hydraulic system; approximately 1 liter of engine oil with a viscosity of 10W40 or 15W40 is required for the engine.
Options de livraison et d'assemblage :
Chez Ma Maisons, nous vous proposons trois options pour l'achat de machines et d'accessoires Jansen. La première consiste à acheter la machine ou la pièce démontée et à la récupérer en magasin. La deuxième option consiste à nous confier l'assemblage de la machine ou de l'accessoire et à le préparer pour votre retrait en magasin. La troisième option consiste à recevoir la machine ou la pièce démontée et à la livrer à l'adresse de votre choix. Lorsque l'article n'affiche que 2 options d'achat, cela signifie qu'aucun assemblage n'est requis. Si vous sélectionnez non assemblé et récupéré à La Meyze ou assemblé et récupéré à La Meyze, suivez les étapes de paiement et sélectionnez le retrait dans la section livraison.
Garanties :
Traitement des demandes de garantie Et si malgré tout quelque chose tourne mal ? Malgré nos normes de qualité élevées, il peut arriver, dans certains cas isolés, que nos produits présentent des défauts ou des carences imprévus. Mais n’ayez crainte, nous ne vous abandonnerons pas ! Les articles achetés chez nous bénéficient d'une garantie de 24 mois. En cas de défaut, nous vous aiderons aussi rapidement et facilement que possible. Procédez comme suit : Étape 1 : Contactez-nous Il nous est toujours utile de recevoir quelques photos illustrant le problème ! Veuillez également indiquer votre numéro de téléphone afin que nous puissions vous rappeler. Nous vous contacterons sous 24 heures (jours ouvrés) pour discuter de tous les détails. Selon l'ampleur du problème, l'une des deux procédures suivantes sera mise en œuvre : Étape 2 : Solution Cela sera réalisé par l'une des méthodes suivantes : Le problème est dû à une seule pièce défectueuse qui peut être facilement remplacée.Dans ce genre de situation, nous vous envoyons la pièce de rechange nécessaire par colis afin que vous puissiez la remplacer vous-même. Vous recevrez peut-être une étiquette de retour prépayée pour nous renvoyer la pièce défectueuse.Nous vous préciserons bien sûr au préalable si le remplacement de la pièce par vos soins est une option envisageable. Le défaut concerne le produit dans son ensemble et ne peut être résolu par le simple remplacement d'une pièce.Dans ce cas extrêmement improbable, nous organiserons l'enlèvement du produit par un transporteur, la réparation du défaut dans notre atelier spécialisé et le retour du produit après test, ou nous vous enverrons un nouveau produit de remplacement par transporteur.Dans ce cas, vous devrez fixer le produit sur une palette pour le transport par le transporteur. Veuillez noter que nous ne pouvons pas prendre en charge les coûts liés aux temps d'arrêt ni les frais de location d'équipement tiers !